BioSmart™ In Wall Edition

Model BIO-500F/220v

Cabinet: All Metal –22 & 24 gauge

Weight: 8.0 lbs

Dimensions: 18” x 4 3/8” x 4” (H,W,D)

Power Requirements: 220 Volt AC — 500 Watt

Power Supply: Requires isolated 12 gauge wire to fuse panel

Chassis Safety Insulation: Exceeds all government and independent laboratory standards for safety in an installed heating appliance (a safety standard that exceeds other manufacturer’s specifications).

Internal Ceramic Blanket: Provides R45 insulation between the wall and the heater. The heater cabinet installed in the wall remains cool to the touch while delivering warm (160° F) infrared heat into the room.

Life Expectancy: 25 years+

Thermostat Power Requirement: None - the unit contains its own low voltage power supply for thermostat operation

Thermostat Type: Any 12-24 volt low-voltage thermostat (not supplied)

Zoned Heat Capability: Pre-wired - simple two-wire contact to any zone control panel—can also accept multiple parallel hook-ups to a single low-voltage thermostat

Safety Cut-Off: Yes

Listed Approvals: CTUV-US & International (UL Equivalent)

Installation: Any wall with a minimum 3 ½ inches of depth

Heat Type: Therapeutic far infrared heat

Heat Chamber: Copper lined for maximum ion transfer

Heating Elements: One (1) 500 watt ceramic infrared emitters 

Ceramic Life Expectancy: Rated at 40,000 hours (30,000 hours is approximately to 10 years)

Heat Output: 2,800 BTU infrared heat

Fan System: One (1) high volume, low noise 90mm DC fan

Frequency Hum: There is no AC 60Hz frequency hum as with other in-wall systems

Fan Noise Level: 18 dB—practically silent

Warranty: 5-Year P & L. 3-Year ceramic emitters.

See your Owner's Manual for specific installation instructions.